JET RSS Nozzle (Steel)

40.00 exc. VAT

The JET RSS50  is meant for printing abrasive materials, and such much stronger than a brass nozzle.  The downside is slower printing speed due to  the lower thermal conductivity of steel, compared to Brass (ca 60% copper).

WHY JET RSS?  – If you print a “multi-hour” object with an abrasive material using a brass nozzle, you will experience that the nozzle wears down while printing. This increasingly affects print quality until it becomes unbearable! JET RSS needs higher temp and slower speed! Steel conducts slower, but will not fail during a print!

Description

The JET RSS50  is meant for printing abrasive materials, and such much stronger than a brass nozzle.  The downside is slower printing speed due to  the lower thermal conductivity of steel, compared to Brass (ca 60% copper).

WHY JET RSS?  – If you print a “multi-hour” object with an abrasive material using a brass nozzle, you will experience that the nozzle wears down while printing. This increasingly affects print quality until it becomes unbearable! JET RSS needs higher temp and slower speed! Steel conducts slower, but will not fail during a print!

Additional information

Weight 0.05 kg